DJI Lito Series Propeller Guards 360°

It protects the propellers from damage. Ideal for complex environments, it allows even beginners to fly more safely. Compatibility: DJI Lito X1, DJI Lito 1 Before attaching the propeller guards to your DJI Lito X1 or DJI Lito 1, make sure that the aircraft firmware is updated to v01.00.0100 or later. If it is not updated, we cannot guarantee flight stability. After installing the propeller guards, the aircraft's weight will exceed 250 g. Before flying, please check and strictly adhere to local laws and regulations. If necessary, obtain the required approvals and permits from relevant government agencies before flight. Do not use the propeller guard in windy conditions. When flying with propeller guards attached, the aircraft's power performance and video transmission performance will be affected. Please keep the flight speed low and operate with caution while constantly checking the video transmission signal strength on the app. The maximum takeoff altitude when using the transmitter is 1500 m, the maximum flight altitude is 120 m, and the maximum range is 500 m. Flying with propeller guards attached will affect the aircraft's obstacle detection capabilities. Please fly in open areas whenever possible. Regulatory requirements vary by country and region. In the EU and the UK, propeller guards can only be legally used on the DJI Lito X1 Fly More Combo Plus (DJI RC 2) aircraft. However, in the EU and the UK, propeller guards and Intelligent Flight Plus must not be installed simultaneously. Doing so may cause the aircraft's total weight to exceed the applicable regulatory weight limit, potentially resulting in additional operational requirements. Please check and comply with local laws and regulations before flying. Weight: 94 g. Dimensions (per piece): 347 x 162 x 59 mm (length x width x height). Maximum dimensions after installation (per set): 347 x 412 x 84 mm (length x width x height) Package contents: 360° propeller guard (set) x 1