READY SPRAY 150 PAINT HYUNDAI YAC

• Capacity: 150 ml

• Base: acrylic resin

• Coverage for a 400 ml can: from 1.25-1.75 m2

• Non-sticky: from 5 to 10 minutes

• Drying time: from 10 to 20 minutes

• Hard/ready to be covered : after approx. 2 hours

• High temperature resistance: up to 110 degrees Celsius

Drying time depends on, among other things, the ambient temperature, air humidity and the density of the varnish used.

How to find the varnish code?

STEP BY STEP INSTRUCTIONS

1. The surface must be thoroughly cleaned and degreased. Any gaps, scratches, and irregularities should be filled with putty, then the repaired surface should be smoothed with 400-grit dry sandpaper. Then apply several thin layers of primer.

It is recommended to wait a few minutes between applying subsequent coats of primer. Then smooth it out using 800-grit sandpaper, and this time wet.

2. Clean and degrease the repaired element again. Please remember to leave a few minutes between applying each layer.

3. About 30 minutes after applying the last coat of basecoat, apply several coats of clearcoat to the repaired area. Finally, we can remove the masking elements. After 24 hours and complete drying, the surface is ready and suitable for polishing.

• Base Coat

NAME: CREAMY WHITE