4Pcs Woodworking Box Clamps Squares 90 Degree Right Angle Adjustable Stainless Steel Corner Clamping Tool Orange

Feature: 1. APPLICABLE SCENARIO: Woodworking box clamps are designed specifically for aligning boxes, drawers and cabinets, provide great convenience for your life and work 2. FLEXIBLE AND ADJUSTABLE: Box clamp squares can be set to fix materials of the same thickness, or easily adjusted to accommodate differences of up to 1 4in on both sides 3. TWO MODES: The box clamp can be used in fixed or manual mode. In both modes, the working mode of the clamp is to nail the material into the fixed stop block of the base. In manual mode, you need to use the knob on the back of the clamp. In the fixed mode, you need to use a hex screw and a hex wrench to tighten the clamp from the top 4. STABLE STRUCTURE: Your box type fixture is delivered in fixture mode, which means that the hex socket screw and the extended washer are located inside the fixture bunk block and screwed into the T nut at the bottom 5. EASY TO OPERATE: To switch to manual clamping mode, the hex socket screw and T nut that fix the fixture bunk block need to be removed. Replace the hex screws and the fixture knob, and place the fixture knob at the bottom. Make sure the extended gasket and the spring below are still in place Specification: Item Type: Woodworking Box Clamps Material: ABS, stainless steel Color: Orange. Package List: 4 x Woodworking Right Angle Clamp Tools 4 x Screws 1 x Wrench 8 x Springs 4 x M8 Plastic Nut 1 x User Manual Note: The box clamp base has three screw holes. If you choose to fix the box clamp to a fixture, you can use these screw holes.