• Equipped with 600 high-brightness SMD5050 LED tapes with waterproof and dustproof silicone tubes. SMD uses a two-row type, so it is brighter than regular LED tape!
• Low voltage DC 24V, very safe to use. Since it is made of soft tape, it can be used on both flat and curved surfaces. The connection method is easy! It can be used by simply connecting the positive and negative terminals.
• It can be cut to your desired length at 5cm intervals, so you can use it according to the location you want to install it. (*A separate soldering iron is required to use the tape after cutting.) It is waterproof, so it can be used outside the car and outdoors.
• Voltage: DC 24V, power consumption: 144W, number of LEDs: 600 pieces, type: SMD5050, luminous color: white, luminous flux: 6000-7200 lumens (1 piece SMD approx. 10-12lm), white base
• Waterproof standard (tape part): IP65 (silicon tube waterproofing, no double-sided tape), tape width: 18mm, tape thickness: 4mm, tape length: 5M, working temperature: -25℃-60℃
[Product specifications]
Color: White
Operating voltage: DC24v only
Current consumption/power consumption: 144W
Waterproof: Waterproof silicone tube processing
LED: SMD5050
Number of LEDs: 600 (5M)
Tape width: 18mm
Tape thickness: 4mm
Tape total length: 5M
Set contents:
LED tape (5m)x1
This LED tape uses [SMD5050] LED chips, and by adopting a two-row system instead of the single-row system as in the past, it has become a high-class LED tape with brightness and light intensity that far exceeds that of regular LED tapes.
It also has a large amount of light, so it can be used for boat lighting as well.
The LED tape itself is soft, so it can be installed with some flexibility.
The LED tape is 5cm wide and has a cut line, so it can be cut. (If you want to use the cut LED tape, you will need a soldering iron.)
To connect, simply connect the positive and negative terminals and the light will turn on.
The operating voltage is 24V, so it can be connected to ships and trucks.
Please note that the operating voltage is 24v only.
[Notes]
*Instruction manual is not included.
*Double-sided tape is not attached to the back of the tape.
*Please use with specified voltage and current.
*Using the product outside of the specifications may cause accidents such as product damage or fire.
*Please do not turn on the LED tape when it is wrapped.
*Forcibly bending may result in poor contact, so we cannot deal with defects caused by excessive bending.
*Please note that there may be slight differences in color temperature depending on the manufacturing lot.
*Be sure to turn off the power when cutting, as it may cause a short circuit and damage.
*LEDs have polarity. If it does not light up, please install it in reverse.
*The wiring part is not waterproof. Although it is waterproof, if you plan to use it in a place where it will get wet, please check carefully before using it.
Geld zurück bei Nichtlieferung
