A high-quality license plate frame that combines license plate protection and a stylish look, with a premium finish.
【Product Features】
■Color Variations
Available in two colors: gloss black, which makes the license plate appear smaller, and titanium silver, which has a high-quality plated base. Features the "MONSTER SPORT" logo.
■こだわりの塗装仕立て
The gloss black version undergoes a two-layer painting process to achieve a black that combines luster and depth.
The titanium silver version has a plated base coat followed by a silver paint layer, creating a luxurious shine and shading.
■License Plate Protection
The structure covers the back and surrounding area of the license plate, preventing bending and damage. Complies with safety standards.
【Installation Precautions】
*When installing this product, if there is insufficient clearance of 5mm or more above and on the sides, and 1mm or more below, the license plate frame may interfere with the bumper, etc.
*On vehicles with a mounting part installed below the license plate at the rear, the license plate frame may interfere.
[Specifications] Material/License Plate Frame Body: ABS Resin
Clip: Steel
Specifications/Gloss Black: Painted Finish
Set Contents
・License Plate Frame Body ×1 ※1
・License Plate Clip ×1
Installation/Secure with bolts to the license plate frame (use the included clip in conjunction) ※2
Size/335 × 170 × 15 mm
Other/Complies with safety standards ※3
(Also complies with standards for vehicles registered after October 1, 2021)
※1 Two frames are required for front and rear installation.
※2 Re-sealing is required for rear installation on regular vehicles.
※3 This is reference data related to the Road Transport Vehicle Safety Standards (as of March 2021) (all other parts are in their normal state). Also, this applies only when used in the specified installation state and handling method. This may not apply depending on the combination of other customization parts installed simultaneously.
[Precautions]
※ Cannot be installed with illuminated license plates.
* This product cannot be installed simultaneously with the Swift Sport [ZC33S] Aerodynamics Rear Bumper.
* When installing simultaneously with the Jimny [JB64W] TOUGH Urethane Rear Bumper, please pay attention to the clearance with the upper part of the license plate mounting area.
* Compatibility with parts from other manufacturers has not been considered.
* This product may be subject to specification changes or discontinuation without notice.
* The information regarding compliance with safety standards for this product (the content on this page) is as of March 2021. This does not apply to standards that become applicable due to revisions after that date.
* Please ensure that the license plate mounting condition (angle, position, etc.) meets the specified conditions.
* The main dimensional conditions for this product when installed on a vehicle are as shown in the separate table (these are reference values as they may vary depending on the installation).
Installation: Securely fastens to the license plate frame with bolts (use the included clips as well).
Size: 335 x 170 x 15 mm
Meets safety standards.
*Two pieces are required for front and rear installation.
*Cannot be installed with illuminated license plates.