Photovoltaic Solar Charger Inverter Pure Sine Wave 5.5KW 48V Built in MPPT Controller 100A

Feature: 1. INVERTER PARAMETERS: 100A MPPT solar inverter, maximum PV array power is 6000W, maximum PV open circuit voltage is 500VDC, MPPT voltage range is 120‑450VDC, with cold start function (46V). 2. WITH MPPT CONTROLLER: 5500W off grid 48V solar inverter built in 100A MPPT charge controller, pure sine wave inverter single phase output 230VAC, which has high efficiency. 3. INTEGRATED DESIGN: Combines inverter, solar charger and battery charger functions to provide uninterruptible power supply support in a single package, with a full range of features. 4. SETTINGS RECOVERY: The MPPT inverter can restore the system settings with one key in the case of wrong settings, avoid machine damage caused by wrong settings, and better protect the system. 5. SMART CHARGING: Designed with smart battery charger to optimize battery performance and support 4 charging modes of utility priority, solar priority, solar and utility, battery and solar. 6. WIDE APPLICATIONS: Compatible with mains voltage or generator power, it can be connected to various household and office loads, including refrigerator, lamp, TV, fan, air conditioner, etc. Specification: Item Type: PV Solar Inverter Inverter Mode: Rated Power: 5500VA 5500W DC Input: 48VDC, 127A AC Output: 230VAC, 50 60Hz, 23.9A, 1Φ AC Charging Mode: AC Input: 230VAC, 50 60Hz, 38.5A, 1Φ DC Output: 54VDC, Maximum 80A, default 30A AC Output: 230VAC, 50 60Hz, 23.9A, 1Φ Solar Charger Mode: Rated Power: 6000W Maximum Charger: 100A Nominal Working Voltage: 240VDC Maximum Solar Voltage (VOC): 500V DC MPPT Voltage Range: 120 450VDC Operating Temperature Range: 10 50 celsius Protection Class: IP21 Output Voltage Waveform: Pure sine wave Efficiency (Peak): 93percent Switching Time: 10ms (For PC) 20ms (For Home Applications). How to Use: 1. Connect the power supply and press the start button 2. LED light indication LED Light Indication Information AC INV Green Long Bright Mains mode power supply Flashing Battery or solar powered CHG Green Long Bright Battery fully charged Flashing Battery is charging FAULT Green Long Bright Inverter failure Flashing Inverter warning 3. Button Function Description Function Key Description ESC Exit setup mode UP Skip to last selection mode DOWN Skip to next selection mode ENTER Confirm selection or enter setup mode Package List: 1 x Solar Inverter1 x Accessory1 x User Manual Note: Installation Precautions 1. Do not install the inverter on flammable structural materials. 2. Mount on a fixed surface. 3. Mount this inverter at a level line of sight to allow the LCD screen to be read at all times. 4. For air circulation to dissipate heat, allow for a clearance of approx. 20cm on the sides, approximately 50cm above and below the device. 5. The recommended installation position is to adhere to the wall vertically. 6. Please make sure to place its objects and surfaces as shown in the picture to ensure adequate heat dissipation and enough space to remove the wires.7.