DDS Signal Generator Counter Digital Control Sine Frequency (15MHz )

Features: JDS6600 series function generator can generate multiple waveforms such as sine wave, square wave, triangle wave, pulse wave, and arbitrary wave. The frequency range up to 60MHz, with duty cycle adjustment, sweep frequency, frequency signal frequency and counter function. The output signal, amplitude, and frequency can be displayed simultaneously. The series signal generator has excellent amplitude and frequency characteristics, the appearance of this instrument is exquisite and beautiful. This instrument is widely used in factories, schools, research institutes and laboratories. Specifications: JDS6600 15M JDS6600 30M JDS6600 40M JDS6600 50M JDS6600 60M Sine wave frequency range 0 15MHz 0 30MHz 0 40MHz 0 50MHz 0 60MHz Square wave frequency range 0 15MHz 0 25MHz 0 25MHz 0 25MHz 0 25MHz Triangle wave frequency range Pulse wave frequency range 0 6MHz 0 6MHz 0 6MHz 0 6MHz 0 6MHz TTL digital wave frequency range Arbitrary frequency range Pulse width adjustment range 100nS 4000S 50nS 4000S 40nS 4000S 30nS 4000S 25nS 4000S Square wave rise time

less than 25ns

less than 15ns

less than 10ns

less than 10ns

less than 10ns Minimum frequency resolution 0.01uHz(0.00000001Hz) Frequency accuracy + 20ppm Frequency stability + 1ppm 3hours + 1ppm 3 hours Waveform characteristics Waveform type Sine, Square, pulse (adjustable duty cycle, precise adjustment of pulse width and period), triangular wave, partial sine wave, CMOS wave, DC level (set DC amplitude by adjusting offset), half wave, full Wave, positive staircase wave, anti ladder wave, noise wave, exponential rise, exponential drop, multi sonic wave, Symplectic pulse and Lorenz pulse and 60arbitrarywaveforms Wave length 2048 points Waveform sampling rate 266MSa s Waveform vertical resolution 14 bits Sine wave Harmonic Suppression

more than 45dBc(<1MHz); more than 40dBc(1MHz 20MHz) Total harmonic distortion <0.8percent (20Hz 20kHz,0dBm) Square wave and pulse wave Overshoot

less than 5percent Pulse wave Duty cycle adjustment range 0.1percent 99.9percent Partial sine wave Duty cycle adjustment range 0.1percent 99.9percent Sawtooth wave Linearity

more than 98percent (0.01Hz 10kHz) Output characteristics Sine wave amplitude range Frequency less than 10MHz 10MHz less than Frequency less than 30MHz 30MHz less than Frequency 2mVpp 20Vpp 2mVpp 10Vpp 2mVpp 5Vpp Square wave, Triangle wave amplitude range Frequency less than 10MHz 10MHz less than Frequency less than 25MHz 2mVpp 20Vpp 2mVpp 5Vpp Amplitude resolution 1mV Amplitude stability + 0.5percent 5 hours Flatness of amplitude + 5percent (<10MHz); + 10percent (>10MHz) Waveform output Output impedance 50 Ohm + 10percent (typical) Protection All signal outputs can work within 60 when the load is short circuited. DC offset Offset adjustment range Output amplitude > 2V 0.2V <Output Range less than 2V 0<Output amplitude less than 0.2V

9.99V 9.99V

2.5V 2.5V

0.25V 0.25V Offset resolution 0.01 V Phase characteristics Phase adjustment range 0 359.9o Phase resolution 0.1o TTL CMOS output Low level <0.3V High level 1V 10V Level rise fall time

less than 20ns

External measurement function Frequency meter function Frequency measurement range 1Hz 100MHz Measurement accuracy Gate time 0.01S 10s continuous adjustment Counter function Counting range 0 4294967295 Coupling method DC and AC coupling methods Counting method Manually 2Vpp 20Vpp Pulse width measurement 0.01us resolution, maximum measurable 20s Period measurement 0.01us resolution, maximum measurable 20s Sweep function Sweep channel CH1 or CH2 Sweep type Linear sweep, logarithmic sweep Sweep time 0.1s 999.9s Setting range Any setting between the maximum output frequency of the corresponding model of the starting point (0.01Hz) and the end point Sweep direction Forward, reverse and round trip Bursting function Number of pulses 1 1048575 Burst mode Manual burst, CH2 burst, external burst (AC), external burst (DC)

General specifications Display Display type 2.4 inch TFT color LCD display Store and load Quantity 100 Position 00 to 99 (00 memory location parameter is loaded by default as power on) Arbitrary wave Quantity 1 to 60 total 60 groups (15 groups by default as power on) Interface Interface mode USB to serial interface Extension interface With TTL level mode serial interface for user secondary development Communication speed Adopt standard 115200bps Protocol Using the command line, the protocol is made public Power supply DC5V+ 0.5V Manufacturing technology Surface mount technology, large scale integrated circuits, high reliability, long service life Prompt tone Users can turn on or off by setting program Operating characteristics All key operations, knob continuous adjustment Environmental conditions Temperature: 0 40 celsius Humidity: <80percent Weight: 1087g(approx.) Package Includes: 1 x JDS6600 Dual channel Signal Generator 1 x Power Adapter 1 x USB Cable 2 x Signal Connecting Cables 1 x English User Manual 1 x BNC Cable Note :

.