SANWA SUPPLY Gigabit PoE Extender with Magnet, Up To 100m Extension, AUTO-MDIX Function, LAN-EXPOE2

This PoE extender operates on PoE power and can extend LAN cables up to 100m. *1 Since the device itself is PoE powered, no power cable is required for relaying or extending. * It can extend not only LAN signals but also PoE power. *2 By relaying up to five units, you can extend LAN cables up to approximately 600m. *3, *4, *5 * Equipped with LEDs that display communication and power supply status. * Its compact size allows for space-saving installation, and it can be wall-mounted or magnetically mounted. * This product is for indoor use only. *1 This is the theoretical value based on the LAN cable standard. *2 The PoE power supplied through this product will decrease due to power loss in the LAN cable and power consumption by the product itself. *3 The maximum number of devices that can be extended may vary depending on the standard of the PoE supplying device and the cable length. *4 If the PoE supplying device is IEEE802.3at compliant, this product can output PoE power. (Compliant with IEEE802.3af/Maximum 15.4W x 1 port) *5 If the PoE supply device is IEEE802.3af, this product will not support PoE power output. (Power will be supplied, but the voltage and power output will not comply with the PoE standard.) *6 For the LAN cable used for PoE power supply, please use a Category 5e/6/6a straight cable or one with a thickness of 24AWG or greater. Recommended cables (manufactured by Sanwa Supply): KB-T6POE series (22AWG), KB-T6TS series (23AWG), KB-T5T series (24AWG solid wire) ■ Color: Black ■ Size: W86.8 x D79.3 x H25.8mm ■ Weight: 196g ■ Maximum transmission speed: 1000Mbps (1000BASE-T) ■ Compliance standards: IEEE802.3 (10BASE-T), IEEE802.3u (100BASE-TX), IEEE802.3ab (1000BASE-T), IEEE802.3x (Flow control for Full-Duplex) PoE receiving port: IEEE802.3af/at PoE supply port: IEEE802.3af * The power supply capacity is reduced by the power consumption of this product itself. Therefore, it cannot supply the IEEE802.3at standard value (30W). ■Access method: CSMA/CD ■Switching method: Store & Forward ■Communication mode: Full duplex/Half duplex ■Port configuration: 1000BASE-T/100BASE-TX/10BASE-T (RJ-45) AUTO-MDIX PoE port (PSE) x 1 port PoE port (PD) x 1 port ■PoE support: Supported ■PoE port output: af standard 15.4W/1 port (max) ■PoE power supply method: Alternative A, Alternative B■Power Consumption (Max): 0.88W■Operating Environment: Temperature/10-40°C, Humidity/10-90% (non-condensing)■Storage Environment: Temperature/-40-70°C, Humidity/5-90% (non-condensing)■Housing Material: Metal■Magnetic Mounting: Yes■Set Contents: Product x 1, Instruction Manual (Warranty) x 1, Wall Mounting Screws x 2, Anchors x 2 This PoE extender operates on PoE power and can extend LAN cables up to 100m. *1 Since the device itself is powered by PoE, no power cable is required for relaying or extension. It can extend not only LAN signals but also PoE power. *2 By relaying up to five units, you can extend LAN cables up to approximately 600m. *3, *4, *5 Equipped with LEDs that display communication and power supply status.