4000-5000R/MIN Two-Stroke 3.5-Horsepower Outboard Engine Suitable For Ships Weighing 100-200kg

4000 - 5000 revolutions per minute, two-stroke, 3.5 horsepower outboard engine. Suitable for vessels weighing between 100 - 200 kilograms. Specification description. Full speed operating range: 4000 - 5000 revolutions per minute. Maximum output power: 2.5 kilowatts (3.5 horsepower) Speed: 10 kilometers per hour Type: Two-stroke Ignition system: CDI system Starting system: Manual start Starting carburetor system: Venturi start Propeller size: 7-1/45 inches (inches) Engine-to-propeller transmission ratio: 2:1 Recommended fuel: Ordinary unleaded gasoline Fuel-to-oil ratio: 35:1 Gear ratio: 27/13 Maximum speed: 10 kilometers per hour Built-in fuel tank: 1.3 liters / 0.29 gallons Hourly fuel consumption: 1.5 liters / 0.33 gallons Rear height: 42 centimeters / 16.54 inches Rear adaptive plate height: ≤ 42 centimeters / 16.53 inches Total weight: 12 kilograms / 26.4 pounds Net weight: 9.8 kilograms / 21.6 pounds Product size: 92*36*15 centimeters Packaging size: 95*42*30 centimeters Rear height adjustable range: 38 - 44 centimeters Rear measurement: The distance from the point where the machine is installed at the stern to the ground is the main feature. High-quality materials: The high-quality aluminum alloy materials used have high hardness, corrosion resistance and rust prevention properties, which can effectively extend the product's service life. Powerful engine: This engine is a 3.5 horsepower engine with a rotational speed of up to 5000 revolutions per minute. The powerful power enables you to travel quickly, thus saving a lot of time. Quick start: It adopts a CDI ignition system, allowing you to start the engine easily and safely, making it more convenient to use and saving energy. Good heat dissipation effect: The heat dissipation holes in the engine housing can quickly dissipate heat, thus avoiding overheating after long-term use. Semi-air-cooled system can also accelerate the cooling speed and reduce the failure rate. Outstanding endurance: The low fuel consumption and efficient two-stroke engine provide you with a long-lasting endurance, meeting the needs of short- and long-distance travel. Built-in propeller design: This product is equipped with a propeller of the built-in type, which is equipped with a high-speed engine and can more effectively exert the outboard exhaust and thrust effect. 180° direction adjustment function: It has a 180° direction adjustment function, allowing you to reverse without shifting gears. Tilt function: This device has a tilt or lift function, making it convenient for operation in shallow water areas. Guaranteed customer service: We are committed to providing high-quality products and services. If you encounter any problems, please contact us at any time. We will reply promptly and solve the related problems for you. Fastening brackets: These fastening brackets are used to fix the propeller and stern plate of the boat to ensure that the propeller does not fall off from the boat. Anti-turbulence plate: There is an anti-turbulence plate above the propeller. It can keep the water flow smooth, giving you a good driving experience. Funnel: This packaging comes with a funnel, which you can use to conveniently add fuel to this engine. Rubber handle: The handle of this motor is made of high-quality rubber, which can increase friction and prevent hand slipping. Easy-to-open engine cover: This easy-to-open engine cover is equipped with a button-type lock, allowing you to immediately reach the engine for real-time inspection and timely adjustment. It is suitable for vessels weighing between 100 - 200 kilograms, with a speed of approximately 8 - 10 kilometers per hour (the speed may vary depending on the environment, water conditions and the weight of the vessel.) Included items: 1* Outboard engine 1* Tool kit 1* Fuel mixing bottle 1* Drain pipe 1* Backup tow rope 1* English manual Note 1. Before use, please read the accompanying user manual carefully. Also, pay special attention to the safety warnings included. 2. Before using the engine, add gear oil to the gears and replace the gear oil after the running-in period (10 hours) (If you don't know how to operate, please contact us). Our outboard engines do not require the use of gear oil. Please prepare it yourself. 3. During startup or operation, do not touch or remove the electrical components. When the engine is running, ensure that your hands, hair and clothes are away from the flywheel and other rotating parts. 4. Do not start the engine on the shore. If you want to test the engine, do it in the river. Do not use it when the engine is retracted from the water. 5. If there is no water flowing out from the motor, stop using it immediately and check if the pump impeller or the water outlet is blocked. 6. We can only provide CE certification. We cannot provide any other certifications. Thank you for your understanding. 7. After sailing in seawater or turbid water, clean the outboard engine with fresh water. Do not place the outboard engine outside until the cooling water is completely depleted. Otherwise, the water valve will enter the cylinder through the exhaust port, causing engine failure. 8. Before long-term storage, use up the gasoline in the fuel tank. The engine should be stored in a dry and well-ventilated place, avoiding direct exposure to sunlight. 9. Please allow me to continue.