Product Introduction
For repairing stock gears and adjusting secondary reduction ratios.
Sprockets are consumables. We recommend inspecting them every 1000km of general road use.
Replace them if the teeth are tapered.
*Due to changes in the tooth count, a speed conversion pulse unit may be required. Please refer to the compatibility chart on the Kitaco website for details.
■Type
41T
■Compatible Models
YZF-R25: RG10J/RG43J/RG95J
MT-25: RG10J/RG43J/RG95J
YZF-R3: RH07J/RH13J/RH25J
MT-03: RH07J/RH21J/RH25J
Ninja 250: EX250L
Z250: ER250C
Ninja 250R: EK250K
Ninja 250SL/ABS: BX250A
Z250SL: BR250A/E, etc.
■Specifications
○520 Size
○Steel
Caution
Sprockets are consumable items. For general use, inspect your sprockets approximately every 1,000 km. Replace them if the teeth are tapered. Daily lubrication will significantly extend the life of your sprockets and chain.
Depending on the vehicle model, you may need a separate speed pulse conversion unit (see below) to correct speedometer errors that occur when changing sprocket tooth combinations or tire sizes.
Part Number: 762-0770100
Compatible with: All YZF-R25 (RG10J) 1WD models (not compatible with ABS models)
Part Number: 762-4780100
Compatible with: All Ninja 250 (EX250L/M models)
Compatible Models: YZF-R25: RG10J/RG43J/RG95J | MT-25: RG10J/RG43J/RG95J | YZF-R3: RH07J/RH13J/RH25J | MT-03: RH07J/RH21J/RH25J | Ninja 250: EX250L | Z250: ER250C | Ninja 250R: EK250K | Ninja 250SL/ABS: BX250A | Z250SL: BR250A/E, etc.
520 size
Steel
*Due to the change in tooth ratio, a speed conversion pulse unit may be required. For details, please refer to the compatibility chart on the Kitaco website.
For repairing stock gears and adjusting secondary reduction ratios.